ReefMind — Settings

Settings are grouped by what you’re trying to do

Start with tanks and equipment. Alerts and diagnostics are separated so routine setup does not bury people in technical data.

👤 Your Profile

Name

Primary Email (your login)

✉️ Additional contact emails (CC'd on weekly digests — partner, backup contact, etc.)

📍 Location (used for weather on dashboard)

🐠 My Tanks

Loading…

📡 My Collectors

Loading…

🖥️ Local Collector

Checking…

🌊 Hydros Cloud Beta · read-only

Share your Hydros tank/controller with reefmind@reefmind.ai, then verify the shared access here. ReefMind uses its delegated read-only account server-side and never asks for your Hydros password.

Hydros sharing steps:
1. Open Hydros/CoralVue and select the tank/controller.
2. Open sharing/users for that tank.
3. Invite reefmind@reefmind.ai with view/read-only access.
4. Return here and click Verify Hydros Share.

ReefMind tank Pick the ReefMind tank that matches the Hydros controller/device.

Hydros account email Enter the Hydros/CoralVue email that owns the tank you shared. ReefMind uses it to find the correct shared tank inside reefmind@reefmind.ai; it is not a password or login credential.

Setup help

Read-only boundary: ReefMind imports Hydros pH/temp and supported status readings. It does not send Hydros control writes.

🧪 Automated Testers Beta · read-only

Connect Focustronic cloud and choose the ReefMind tank. ReefMind reads each unit by its official device class — an Alkatronic imports alkalinity/pH, while a Mastertronic or Mastertronic Essential imports NO3, PO4, calcium, magnesium, and alkalinity — so the two never cross over.

Focustronic Lab Testers: OAuth/API access is read-only. ReefMind reads test results only, stores them with the selected tank, and does not control Alkatronic, Mastertronic, Dosatronic/Dosetronic, dosing, schedules, or the Focustronic app.

Alkatronic imports:
Alkalinity (dKH) and pH.

Mastertronic & Mastertronic Essential imports:
NO3, PO4, calcium, magnesium, and alkalinity.

Raw read-only extras:
OLI, NO2, NH4, Fe, and I are stored raw — no alerts and no Captain Chris analysis — until reef semantics are defined.

Discovery-only:
Dosatronic/Dosetronic and other Focustronic classes stay read-only and are not imported until a read-only records endpoint is documented.

The beta card supports OAuth start, temporary code Connect, Status, and Sync Now when this environment has Focustronic OAuth configured.

📷 Camera Setup

Connect a camera to capture snapshots from your local network every 15 minutes via your Pi collector. Your Pi must be installed and running on the same network as your cameras.

Supported Cameras

📷

Reolink

Set the camera's local admin password, enable HTTP access, and enter the camera IP in ReefMind. The Reolink username is always locked to admin.

🔒 Username: admin (locked for Reolink)

Setting up your Reolink camera

Set local admin password — Open the Reolink app → tap your camera → Settings gear → Advanced Settings → User Management → set a password for the admin account. Write it down — you'll need it below.⚠️ This is NOT your Reolink account password. It's a separate local password.
Enable HTTP access — In Reolink app → Settings → Network → Advanced → Port Settings → make sure HTTP port is enabled (default: 80).
Find your camera's IP address — In Reolink app → Settings → Network → Network Info → note the IP address (e.g., 10.0.0.209). Your Pi must be on the same WiFi network.

⚠️ Password Setup: Use only letters and numbers in your camera password. Avoid special characters like @ # % & — these can prevent ReefMind from taking snapshots even if the password works in your browser.

Guided

📷

Tapo (TP-Link)

Enter your camera IP, username, and password in the collector wizard.

Manual

🔑

Kasa (TP-Link)

Enter your Kasa account email, password, and camera IP in the collector wizard.

Manual

🔗

Generic RTSP / HTTP

Paste your camera's RTSP or HTTP snapshot URL into the collector wizard.

Manual

📥 Add cameras from the Camera tab. Use the "Activate New Collector" button above first if your Pi collector is not installed yet.

Skip the 15-minute wait — trigger an instant snapshot from all your cameras right now.

🎛️ Preferences

Temperature Unit

Theme

Email notifications

Alert notifications

🔔 Alert Preferences

Choose which alert types to receive. Silenced alerts won't appear in your dashboard or send push notifications.

🔴

Critical pH

pH outside safe range (<7.8 or >8.7)

🌡️

Critical Temperature

Temp outside safe range (<75°F or >82°F)

🟡

Alkalinity Warning

Alk trending outside target range

🟡

Calcium Warning

Ca outside target range

🟡

Nutrient Warning

NO₃ or PO₄ outside target range

📡

Collector Offline

No data received for >2 hours

📊 Sync Metrics

Live sync status, reading counts, and service health.

Live Sync Time

🖥️ Local Collector

Apex LAN sync · background service

—

Loading…

☁️ Fusion Cloud

Neptune Fusion relay · cloud polling

—

Loading…

Stats

—

Total Readings

—

First Sync

Service Health

Unknown

Checking…

📊 Data Collection Status

What data your collector is actively capturing.

Loading…

🖥️ Pi Device Health

Live status of your ReefMind Pi collector.

Loading…

🙈 Ignored Issues

Issues you've dismissed from the Active Issues panel. Restore them here.

Loading…

v— env:— deployed:— build:— rev:—

Need help? Contact support@reefmind.ai or join our Discord